Control Countertops Quality

How to Check Countertops Quality?

During checking countertops, we normally will use following tools:

1. Layout the countertops with the order drawing, to check the color and surface look, as well as the connection parts is good enough. Usually can use a long and straight bean to check if they are in same horizon. Two connection part is good or not.

 2. Use the steel measuring tape to check general sizes, like width, length, thickness, sink hole sizes. as well as the finished details.

3. Apply Standard Vernier Calipers to check the thickness. The vermier caliper in accuracy with the tolerance 0.1mm.

4. After checking all the parts are ok, then can go to next stage--packing. During packing will use thin foam plastic to protect the surface of the stone. And for exported, we will use seaworthy fumigation wooden crates.